RadioMaster GX10 Dual-Band Radio Controller

Description

The RadioMaster GX10 is a compact gamepad-style radio controller designed for pilots who prefer a smaller transmitter without compromising performance or functionality. Combining powerful hardware with the flexibility of the EdgeTX ecosystem, the GX10 delivers the features and performance expected from a full-size radio in a compact, ergonomic design.

Powered by the high-performance STM32 H7 processor, the GX10 delivers a fast, responsive EdgeTX experience with quicker script execution, rapid model loading, and smooth operation. Onboard flash memory, combined with support for external MicroSD cards, provides flexible storage for models, firmware, sounds, images, and Lua scripts.

At its core, the GX10 features a Semtech LR1121 transceiver supporting ExpressLRS (ELRS) in either 2.4GHz or Sub-G 900MHz configurations. The GX10 delivers low-latency and robust link for reliable operation in demanding RF environments. The GX10 comes fitted with a low-profile 2.4GHz antenna that sits flush with the radio while rotating for optimal antenna orientation. A Dual-Band antenna is also included and can be easily installed when Dual-Band operation is required.

The GX10 features a vibrant 2.8-inch IPS touchscreen that provides a clear, responsive interface while maintaining its compact gamepad-style form factor. Standard models are equipped with X4-V2 Hall-effect gimbals with fully programmable LED light rings, delivering smooth and precise control. Six fully programmable RGB buttons along the bottom of the radio provide instant access to flight modes, telemetry callouts, EdgeTX functions, or any custom function you choose.

Please note: Batteries are not included. You will need 2 × 18650 3.7V Li‑Ion Batteries or 1 × 2S 7.4V LiPo Battery for this Radio.

Requires

• 2 × 18650 3.7V Li‑Ion Batteries

Features

• High-Performance MCU: Powered by the STM32H7 processor for fast and responsive system performance.
• Top Mounted IPS Touchscreen Display: 2.8-inch 320×240 IPS touchscreen with vibrant colors and excellent visibility.
• Precision Hall Sensor Gimbals: Standard X4 V2 Hall sensor gimbals provide smooth and accurate control.
• Internal ExpressLRS RF System: Built-in Semtech LR1121 RF transceiver supporting ExpressLRS on 2.4GHz or Sub-G 900MHz, delivering low latency, robust link quality and dependable performance.
• Smart Balance Battery Circuit: Integrated balanced charging improves battery efficiency, safety, and lifespan.
• Efficient Cooling System: Low-noise cooling fan and aluminum heat sink maintain reliable performance during high-power operation.
• Low-Profile Rotating Antenna: Supplied with a flush-fitting 2.4GHz only antenna that rotates for optimal antenna orientation and a sleek compact design. A Dual-Band antenna is also included for 2.4GHz and Sub-G operation.
• Six Programmable RGB Buttons: Fully customizable RGB buttons provide instant access to flight modes, EdgeTX functions, telemetry callouts, and more.
• Built-in Motion Sensor: Trigger logic switches, control camera gimbals, or activate telemetry callouts simply by tilting the radio.
• Built-in Microphone: Supports custom sound recording function and for future feature expansion.
• Storage: Built-in flash memory with external SD card support.

Specifications

• Item: GX10 Radio
• Color: Grey / Transparent Charcoal
• Dimensions: 180 × 165 × 83 mm
• Weight: 456 g (excluding batteries)
• Frequency Range: 2.4GHz ISM or Sub-G 900MHz (depending on configuration)
• Internal RF: ELRS 2.4GHz / Sub-G 900MHz
• Supported Protocols: Express-LRS
• Firmware: EdgeTX (requires 2.12.0 or later)
• Internal RF Firmware: ExpressLRS 3.6.3
• Cooling Fan: Yes
• Transmitter Module: Built-in ELRS
• Built-in Flash: 512MB
• MicroSD card (Not included): 32GB/FAT32 (Inserting a MicroSD card will disable the onboard flash)
• Channels: Up to 16 channels (receiver dependent)
• Display: 2.8-inch IPS Touchscreen 320 × 240 Resolution
• Built-in Microphone: Yes
• Built-in Motion Sensor: Yes (SC7U22)
• Antenna Gain: 2dB
• Maximum Current: 850mA@8.4V at maximum output power
• Operating Voltage: 6.6 – 8.4V DC
• Battery Support: 2 × 18650 Li-ion batteries (batteries not included)
• Connectivity: USB-C
• Gimbal: X4-V2 Hall Sensor Gimbals
• Gimbal Sticks: M3
• Module Bay: Nano module bay
• Upgrade Method: USB-C (UF2)

Package Includes

• 1 × GX10 Radio Controller
• 1 × GX10 Carry Case
• 1 × Gimbal Protector
• 1 × Dual-Band Antenna
• 1 × MMCX Removal Tool
• 1 × Type-C Cable
• 1 × Screen Protector
• 1 × 1.5mm Hex Wrench
• 2 × Slider Delete Grommets
• 7 × Switch Delete Grommets
• 1 × RadioMaster Sticker Set
• 1 × GX10 Manual
• 1 × Inventory Card