OMP M2 EVO MK2 RTF with RadioMaster Zorro TX

Description

Two years of development, thousands of rigorous test flights, and feedback from the best of the best have led to the pinnacle of micro RC helicopter flight control technology: Introducing OFS3 and the OMP Hobby M2 EVO MK2 RTF with RadioMaster Zorro TX.

Based on the tried-and-true M2 EVO platform, the M2 EVO MK2 provides the perfect airframe for OFS3 to play out all its advantages. With an upgraded main motor for more power and improved TALY control, a new swashplate allowing for 15% larger cyclic pitch throws and stylish white landing gear for vastly improved in-flight visibility, the M2 EVO MK2 remains faithful to the original design, yet offers drastically improved flight capabilities. Existing EVO helicopters can be easily upgraded to full MK2 spec.

Rewritten from the ground up, OFS3 is a state-of-the-art, open-parameter 2-in-1 integrated flight control stack, setting a new standard for flight performance, customizability, and setup versatility. With both completely reworked 3D and attitude modes, OFS3 caters to competition-level pilots and novices alike. No micro helicopter has ever flown better.With the OMPHOBBY smartphone app, tuning OFS3 is a breeze! You can access every parameter that makes OFS3 fly, such as full PIDF and TALY gains, rates, deadbands, filters and much more. Want to skip all this and just get to flying? A simplified LED tuning setup like on the previous generation OFS is also available.

Full voltage and mAh telemetry on ExpressLRS, CROSSFIRE and M1 Hobby Store lets you enjoy each and every flight to the fullest - without ever worrying about your battery again. RPM and attitude telemetry puts you in charge of your helicopter's flight envelope.

If transmitter programming feels overwhelming to you, the new, optional Software Throttle mode makes setting up throttle curve mixes obsolete - simply assign a 3-position switch and define your throttle values in the OMPHOBBY app. Fly more, set up less. Traditional throttle mixes can of course still be used.

Features

Completely new, third generation flight controller for M2 EVO MK2
Dramatically improved flight performance in every situation
2nd generation TALY algorithm delivers collective-pitch level tail performance
CRSF (ExpressLRS, CROSSFIRE, Tracer) compatible with full telemetry return:
- Capacity (mAh)
- Current (A)
- Voltage (V)
- RPM (1/min)
- ESC Temperature (°C)
- Vehicle Attitude (rad; °)
Optional, fully configurable Software Throttle mode makes throttle curve mixes obsolete
Two completely separate parameter sets adjustable, divided into Basic and Expert setups
Bluetooth setup via OMPHOBBY app with full parameter access:
- PIDF and TALY gains
- Deadbands
- Rates and Expo
- Mechanical setup
- Software Throttle Values
LED setup on flight controller available
M2 EVO MK2 has been upgraded for next-level flight performance:
- New motor with larger stator and higher Kv
- New swashplate with optimized geometry
- White landing gear for optimal visibility

The OMP Hobby M2 EVO MK2 RTF with RadioMaster Zorro TX comes as a "ready to fly" RC helicopter kit, with RadioMaster Zorro ExpressLRS RC Transmitter, RadioMaster RP2 ExpressLRS Receiver, and 2x RadioMaster 18350 900mAh batteries included.

Additional batteries for the OMP Hobby M2 EVO MK2 can be purchased here.

Plug and play Futaba authorized receiver is available here.

Plug and play Spektrum compatible receiver is available here.

Plug and play ExpressLRS receiver is available here.